程控全自動精密打圈機

PROGRAM-CONTROLLED AUTOMATIC

LOOPED MACHINE

適用于鋼線、鐵線、不銹鋼線有色金屬線材（圓線、方線、扁線）卷圓、半圓或任意角度（同心角）的圓弧，本機是五金、鐵線行業專用設備之一。

只需將鐵絲整卷放入鐵絲架上，取一頭線頭穿入打圈機的孔位，按打圈產品規格設置好線周長數值、數量、線速，開啟開關打圈機即可全自動運作，控制器采用日本三菱PLC，操作面板采用人機對話界面，界面為中英文（可選）顯示，送料系統采用伺服電機送料，切斷采用液壓系統切線，當完成任務后打圈機會自動停機，電機啟動即有產品出，定長精度高，送線速度可自由設定，送料速度可高達40-70米/分鐘，當線長精度誤差超出0.5mm時，設備自動報警停機，減少不必要的線材損耗，本機只需用一臺小功率電機,比油壓式和機械式更為省電。

Applicable to
steel wire, wire, stainless steel wire non-ferrous metal wire (circle line,
party line, flat wire) roll round, semicircle or arbitrary Angle (with one
Angle of arc, this machine is) hardware, wire industry one of the special
equipment.

Just put the
wire rolls in wire frame, take a head through the thrum of looped machine
designated a hole, according to the product specification hits a circle line
perimeter set numerical, quantity, line speed, open switch looped machine can
automatic operation, controller from Japan mitsubishi is used PLC, operation
panel man-machine dialog interface, interface is both in Chinese and in English
(optional) display, feeding system adopt servo motor, cut off the feeding
hydraulic system the tangent, when complete after task given looped opportunity
automatic stop, motor start namely have a fixed length products, high
precision, send linear velocity can be set free, feeding speed can be as high
as 40-70 meters per minute, when the line length error precision than 0.5 mm,
equipment automatic alarm downtime, reduce unnecessary wire, this machine is
only loss by a small electric motor, power than hydraulic power and mechanical
more saving.