MEDTHERM 64 Series Gardon gage offer dependable direct measurement of heat transfer rates in a variety of applications due to careful design, rugged quality construction and versatile mounting configurations. Each transducer will provide a self-generated 10-millivolts (nominal) output at the design Gardon gage. Continuous readings from zero to 150% design heat flux are made with infinite resolution. The linear transducer output is directly proportional to the net heat transfer rate absorbed by the sensor. 64 Series transducers have for almost forty years met thousands of application challenges in ground and flight aerospace testing, fire testing, flammability heat flux standards, heat transfer research, materials development, and furnace development. CALIBRATION Each gardon gage is provided with a certified comparison calibration per written procedures to ANSI/NCSL Z540-1, ISO 10012-1, and ISO/IEC 17025. Calibrations are traceable through temperature standards and electrical standards to the National Institute of Standards and Technology (NIST). Calibrations are radiant calibrations, referenced both to blackbody simulators as source standards and to a set of MEDTHERM Kendall Absolute Cavity (ECR) Radiometers as detector standards. Special calibrations are also available. Gardon gage FEATURES * LINEAR OUTPUT * OUTPUT PROPORTIONAL TO HEAT TRANSFER RATE * ACCURATE, RUGGED, RELIABLE * CONVENIENT MOUNTING * UNCOOLED, WATER COOLED, GAS PURGED MODELS * RADIOMETER AND LIMITED VIEW ACCESSORIES * MEASURE TOTAL HEAT FLUX * MEASURE RADIANT HEAT FLUX Gardon gage standard in the ranges from 5 to 4000 Medtherm戈登熱流傳感器64系列的結構： 準確、堅固、的圓箔式和塞式傳感器。 OFHC銅質體，確保長傳感器壽命和信號穩定性。 不銹鋼法蘭（如配備），便于安裝。 采用焊接接頭、銅絲編織屏蔽絞線、Teflon絕緣材料以及應力釋放，防止受損和寄生信號，從而確保信號完整性。 Medtherm戈登熱流傳感器64系列的規格 標準量程：4000，3000，2500，2000，1500，1000，500，250，200，100，50，30,25，20，15，10，5，2，1，0.5，0.2 Btu/(ft