球磨機適用于粉墨各種礦石及其它物料，被廣泛用于選礦，建材及化工等行業，可分為干式和濕式兩種磨礦方式。根據排礦方式不同，可分格子型和溢流型兩種。 Ball mills are used primary for single stage fine grinding.It is the key equipment that repulverizes the material after it is crushed,which is widely used iin the manufacture industries,such as cement,silicate,new building materialk,refractory material,fertilizer,mill run of ferrous metal,nonferrors metal and glass ceramics and can be used for the dry and wet pulverization for all kinds of ores and other grindable materials. 工作原理 物料有進料設備經入料中空軸螺旋均勻地進入磨機倉，該倉內有階梯襯板或波紋襯板，內裝不同規格鋼球，筒體轉動產生離心力將鋼球帶到一定高度后落下，對物料產生重擊和研磨作用。物料在倉達到粗磨后，經單層隔倉板進入第二倉，該倉內鑲有平襯板，內有鋼球，將物料進一步研磨。粉狀物通過卸料算板排出，完成粉磨作業。 Working principle Material is feed through the feeding device into the first chamber by air evenly into the mill screw shaft first warehouse.In the chamber,there are ladder liner or corrugated liner,and different seze of ball.When working,the cylinder rotation produce centrifugal force bringing the ball to a certain height,then the ball is falling ,frinding and impacting the material.After the grinding in first chamber,the material goes to second chamber through separate grid plate.Here are flat liners and balls,which grinding the material again.After grinding,final powder product is unloaded by discharge grid plate. 結構特點 本機由給料部、出料部、回轉部、轉動部（減速機，小轉動齒輪，惦記，電控）等主要部分組成。中空軸采用鑄鋼件，內襯可拆換，回轉大齒輪采用鑄件滾齒加工，筒體內鑲有耐磨襯板，具有良好的耐磨性。本機運轉平穩，工作。 Features and benefits This machine is made up of feeding part,discharging part,gyre part, transmission part,(decelerator, small transmission gear,generator,electrical control) and so on.The hollow axis adopts the cast steel and the lining can be replaced,the rotary big gear is processed from cast rolling gear.The barrel body is wearable well and bears wearable scaleboard.This machine runs steadily and works reliably. 規格與性能參數表|Specifications: 規格型號 Model 筒體轉速 Speed of bucket(r/min) 裝球量 Weight of Ball (t) 給料粒度 Sizeof Feed opening(mm) 出料粒度 Size of outputting(mm) 產量 Capacity(t/h) 電