酒店客房IC卡智能節電取電開關The guest room IC card intelligence stanza electricity in hotel takes to 酒店客房IC卡智電節能取電開關酒店客房IC卡、感應卡智能節電取電開關是我公司專為酒店賓館而設計的酒店客房智能節能取電開關。它采客房的開門卡進行取電和去電，以致客人離開客房既將客房的電關掉，節約電能。 <一> 功能：靜態時：指示燈亮無負載輸出。動態時：指示燈熄滅有負載輸出（即1、插入卡指示燈熄滅，有負載輸出；拔出卡后經5－10秒延時指示燈亮，無負載輸出。） <二> 性能： 1、 額定工作電壓：U＝AC200V 2、 靜態工作電流：IS＜10mA 3、 靜態功耗：Ps＜40Mw 4、 動態工作電流：ID＜20mA 5、 動態功耗PD＜0.5W 6、 較大工作負載電流：IR＝30A 7、 規格： A、 外觀尺寸：85×85×39mm B、 整機重量：G＝100g <三> 檢測：按操做指導書接好線，檢查無誤后通電。通電后，指示燈亮，負載斷電。插入使用卡，指示燈熄滅，則負載通電。拔出使用卡，經5－10秒的延時指示燈亮，負載斷電。經過上述的插卡――工作－拔卡――延時關閉為一個工作周期。若上述工作正　　確，則本產品的功能是完全的，到此測試完畢。 <四> 安裝步驟： 1． 將節電開關面板與底板掰開。 2． 連接電源和負載；電源火線、零線分別接在節電開關標有IN的兩個接線柱上，負載的火線，零線分別接在節電開關標有OUT的兩個接線柱上。 3． 用兩個螺釘將開關底板固定在標準電源開關盒上。 4． 將節電開關面板與開關底板扣位對齊，適當加壓，使開關面板與開關底扣緊。 警告：請確認電源接線無誤后才能通電。 火線輸入 火線輸入 零線輸出 零線輸出此示圖為元件層的主視圖 The guest room IC card intelligence stanza electricity in hotel takes to give or get an electric shock a switch The guest room IC card in hotel Zhi electricity economy energy’s taking to give or get an electric shock guest room IC card in switch hotel and responding the card intelligence stanza electricity to take to give or get an electric shock a switch is just for my company the guest room intelligence economy energy in hotel of guest house in the hotel but design to take to give or get an electric shock a switch.It adopts opening the door of guest room the card carry on taking an electricity and give or get an electric shock, with the result that the guest leaves guest room since turn off the electricity of guest room, economize electric power.<1> function:Static state:The indicator is bright to have no load to output.Dynamic state:The indicator puts out load exportation(namely 1, insert a card indicator to put out, have a load to output;The indicator is bright, has no load to output while postponing through 5-10 after pulling out card.)<2> function:1, the sum settle work electric voltage:U=AC200 V 2, the static state work electric current:IS<10 mas 3, the static state achievement consume:Ps<40 Mws 4