名片曝光使用說明

步驟1:創建名片

微信掃描名片二維碼,進入虎易名片小程序,使用微信授權登錄并創建您的名片。

步驟2:投放名片

創建名片成功后,將投放名片至該產品“同類優質商家”欄目下,即開啟名片曝光服務,服務費用為:1虎幣/天。(虎幣充值比率:1虎幣=1.00人民幣)

關于曝光服務

名片曝光只限于使用免費模板的企業產品詳細頁下,因此當企業使用收費模板時,曝光服務將自動失效,并停止扣除服務費。

<

返回首頁

S8030-DL詳細介紹

一、大雙軌機產品描述及規格:

二、設備硬件配置:

型號 Model

大雙   s8030-DL

量原理   Measurement Principle

3D 白光 PSLM PMP (可構光相位調制輪廓量技,俗摩爾條
   3D white light PSLM PMP(Programmable Spatial Light Modulation,commonly known 
   as moire fringe technology)

 Measurements

,面,高度,XY偏移,形 (volumeacreageheight   XY offset, shape   )

檢測不良類型 
   Detection of Non - Performing Types

漏印、少、多連錫、偏位、形不良、板面污染
   (missing print,insufficient tin, excessive tin, bridging, offset,    mal-shapes, surface 
   contamination)

相機像素 Camera Pixel

5M,可4M/8M/12M (4M/8M/12M as option)

頭類型    Lens Types

telecentric lens

頭解析度    Lens Resolution

15um,可8/10/13/18/20um (8/10/13/18/20um as option)

視野尺寸 FOV Size

38.4*30.6mm20.5*16.3/25.6*24.5/33.3*26.5/46.1*36.7/51.2*40.8mm

精度 Accuracy

XY解析度(XY Resolution)1um;高度(height)0.37um

重復精度 Repeatability

高度:小于1um 4 Sigma);體/:小于1%4   Sigma
   height
<1um   4   Sigma);volume/acreage<1%4   Sigma

檢測重復性   Gage R&R

遠遠小于10%   (far less than10%)

FOV速度   FOV    Speed

0.3s/FOV

檢測 
   Quantity of Inspection Head

Twin-HeadsSingle Head Tri-Heads   as option

紅綠藍/RGB 三色光源Red Green Blue/RGB Three 
   Colas Option Light Source

standard    configuration

基準點檢測時 Mark-point Detection T

0.5/   (0.5sec/piece)

Z升降補Compensation Plate   Bending 
   of Real-time Lift in Z-axis

standard    configuration

最大檢測高度 
   Maximun Meauring Height

±550um  ±1200um as option)

頭類型   Lens Types

長焦頭,可選遠telephoto lens, telecentric lens    as option

PCB最大量高度 
   Maximun Measuring Height of PCB Warp

±3.5mm (±5mm as option)

最小焊間距 Minimum Pad Spacing

100um (焊高度150um的焊盤為基準pad height of 150um as the reference

最小量大小 Smallest    Measuring Size

長方形(rectangle)150um(round)200um

最大PCB板尺寸 
   Maximum Loading PCB Size

模式(dual-track model)50*50630   x 300 mm
單軌模式(single track model):50*50630   x 590 mm

PCB板厚度   Thickness of   the PCB

0.4-7mm

零件高度限制 
   Height Limitations of the Parts

40mm,40mm (up:40mm   down:40mm)

板邊距
   Board Edge Distance

3mm ,可萬能   multifunctional clip edge    as option

定動設置 Flixble or Fixed Orbit   Setting

*14導軌固定,23活動;14軌導間距離686mm1234軌導
最大距離分300mm*1固定,234活動;
   *standard configuration:track 1 and track 4 are fixed, track 2 and track 3   are flexible , 
   the distance between track 1 and   track 4 is 686mm,   and the   maximum distance 
   between track 1 and track, track3 and track 4 are 300mm.
   *track 1 fixed, track 2,3,4 flexible as option

PCB送方向 PCB Transfer Direction

左到右或右到左,出廠前設定left to right or right to left, set before delivery

調   Orbit   Width Adjustment

有兩根道可自動調寬,出廠前設定(   two tracks can automatically adjust the width, 
   set before delivery)

SPC計數   SPC Statistics

HistogramXbar-R ChartXbar-S   ChartCP&CPK%Gage   Repartability Data
   SPI Daily/Weekly/Monthly Reports

GerberCAD 
   Gerber & CAD Data Imput

支持Gerber格式274x274d(support   Gerber format);人工Teach模式 
   (manual Teach model) 
CAD X/YPart No.Package   Type (CAD X/Y
   Part No.
Package   Type imput)


產品推薦
“spi檢測設備 SPI錫膏檢測機”信息由發布人自行提供,其真實性、合法性由發布人負責。交易匯款需謹慎,請注意調查核實。
主站蜘蛛池模板: 崇礼县| 育儿| 垫江县| 游戏| 澜沧| 凤山县| 子长县| 宝清县| 富川| 莆田市| 天等县| 女性| 汉中市| 汉沽区| 贵溪市| 泰来县| 平潭县| 峨眉山市| 左贡县| 彭泽县| 新邵县| 奇台县| 辽宁省| 若尔盖县| 元阳县| 桃源县| 清河县| 五大连池市| 普陀区| 汽车| 汕头市| 商城县| 获嘉县| 双流县| 巴马| 桐柏县| 汝阳县| 东兴市| 福鼎市| 新兴县| 彝良县|