性能特點FEATURES
·高速開模使用曲柄型機構、瞬間加速開模。
·伺服型油壓系統控制、獨立運作可減少噪音提高效率。
·三菱伺服控制、高速進口線型滑軌、移座定位準確。
·伺服節能環保型設計系統、省電25%-45%，模站免通水，采用高效隔熱材料。
·安全升級全自動、開關、電眼保護。
·空間合理化設計、結構簡約。
·料量精準計量機構采用電位計檢測并配合PLC及PC運算，可精準控制料量。
·Crank mechanism is used for opening the mould at high speed, with instantaneous acceleration.
·Servo-style oil pressure system control operating independently can reduce the noise and improve the efficiency.
·MITSUBISHI servo control and high-speed imported streamline track are configured, with accurate orientation and seat movement.
·Servo energy-saving environmental friendly design system is configured, highly efficient heat-isolating material, with 25-45% power reduced, without water flow in mould station.
·The security level is upgraded, with fully automatic switch and magic eye for protection.
·The space is designed reasonably, with embedded oil tank and simple structure.
·The material volume can be measured accurately by the measuring mechanism, tested by potentiometer, calculated together with PLC and PC, with can control the material volume accurately.
350mm加高開模行程，可彈性運用各種不同形式模具
It is configured with 350mm high elevated mould-opening storke that can use the moulds in various forms.
模厚調整裝置、模厚100-250mm可無段調整
Mold thickness adjustment device mold thickness of 100-250mm can be step less adjustment
技術參數MAIN SPECIFICATIONS
Model | 產品型號 | YGEVA-06A | |||||
The machine mold station | 機器模站 | 4站 | 6站 | 8站 | 10站 | ||
mold clamping force(Tons) | 合模力(tons) | 170 | 170 | 170 | 170 | ||
Mold hold height(mm) | 容模高度(mm) | 100-250 | 100-250 | 100-250 | 100-250 | ||
Mold Dimension(mm) | 模板尺寸(mm) | (285×550)×2 | (285×550)×2 | (285×550)×2 | (285×550)×2 | ||
Opening Mold process(mm) | 開模行程(mm) | 350 | 350 | 350 | 350 | ||
Ejection seat number | 射出座數 | 2 | 2 | 2 | 2 | ||
Maximum injection quantity(g) | 最大射出量(g) | 1100 | 1100 | 1100 | 1100 | ||
Injection speed(cm/sec) | 射出速度(cm/sec) | 0-10 | 0-10 | 0-10 | 0-10 | ||
Temperature control number | 溫控段數 | 4 | 4 | 4 | 4 | ||
Screw diameter(mm) | 螺桿直徑(mm) | 65×2 | 65×2 | 65×2 | 65×2 | ||
Screw speed(r.p.m) | 螺桿轉速(r.p.m) | 0-120 | 0-120 | 0-120 | 0-120 | ||
Injection pressure(mpa) | 射出壓力(Mpa) | 1000 | 1000 | 1000 | 1000 | ||
Machine weight(t) | 機械重量(t) | 16.5t | 23t | 29.5t | 36t | ||
Tube electric heating energy(kw) | 料管電熱能量(kw) | 11.6 | 11.6 | 11.6 | 11.6 | ||
Move seat motor(kw) | 移座馬達(kw) | 1.5 | 1.5 | 1.5 | 1.5 | ||
Vacuum pump(kw) | 真空泵浦(Kw) | 1.5 | 1.5 | 1.5 | 1.5 | ||
Hydraulic motor system(kw) | 油壓系統馬達(Kw) | 49.2 | 49.2 | 49.2 | 49.2 | ||
Mold heating(kw) | 模具加熱(kw) | 48 | 72 | 96 | 120 | ||
Cooling fan(kw) | 冷卻風扇(Kw) | 2.2 | 2.2 | 2.2 | 2.2 | ||
Total power consumption(kw) | 總用電量(kw) | 114 | 138 | 162 | 188 | ||
Fuel oil consumption(L) | 油箱用油量(L) | 750 | 750 | 750 | 750 | ||
The machine length(m) | 機器長度(m) | 6.2 | 8 | 9.8 | 11.6 | ||
The machine width(m) | 機器寬度(m) | 3.85 | 3.85 | 3.85 | 3.85 | ||
The machine height(m) | 機器高度(m) | 2.85 | 2.85 | 2.85 | 2.85 | ||
Machine erect position length(m) | 站位長度(m) | 3.95 | 5.75 | 7.55 | 9.35 | ||
此表格參數根據機器不同配置而作相應修改
The parameters in this table can be changed accordingly based on different configurations of the machine
