名片曝光使用說明

步驟1:創建名片

微信掃描名片二維碼,進入虎易名片小程序,使用微信授權登錄并創建您的名片。

步驟2:投放名片

創建名片成功后,將投放名片至該產品“同類優質商家”欄目下,即開啟名片曝光服務,服務費用為:1虎幣/天。(虎幣充值比率:1虎幣=1.00人民幣)

關于曝光服務

名片曝光只限于使用免費模板的企業產品詳細頁下,因此當企業使用收費模板時,曝光服務將自動失效,并停止扣除服務費。

<

返回首頁

產品分類 更多>>

品牌
鑫立XINLI
型號
YDT-D6
加工定制
額定電流
16(A)
定時范圍
一星期
環境溫度
-25~65(℃)
殼體材質
PC
特色服務
支持混批
導電體材質
磷銅
產品認證
CE ROHS LVD CB
額定電壓
220-240(V)
物料編號
1
產品用途
定時插座
顏色
白色

*************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************





IMPORTANT

Don’t plug in any appliance where the load exceeds 16Amp.Always ensure the plug of any appliance is fully inserted into the timer outlet.If cleaning of the timer is required,remove from mains power and wipe it with a dry cloth.

DON’T IMMERSE TIMER IN WATER OR ANY OTHER LIQUID.

Heaters and similar appliances should never be left unattended during operation.The manufacture r recommends such appliances not be connected to timers.

MANUAL ON/AUTO/MANUAL OFF SETTING

1.Press MODE button to revert the four mode in turn.

2.In MANUAL ON or MANUAL OFF mode the Timer doesn’t operate as settings in AUTO mode.

3.When the mode is turned from MANUAL to AUTO,the Timer will keep the setting of MANUAL until to the next timer setting.

INITIAL OPERATION

1.Plug the timer into a regular 220-240 Volt household power point and turn the power on.

2.Let it be charged for about 12 hours.

3.After charging clear all current infomation by pressing the RESET button with a sharp object such as a pen or pencil.

4.The timer is now ready to be set up for use.

SETTING CURRENT TIME

1.Press the TIMER button and hold, also press the WEEK button to until the actual day is displayed.And then set the time by press the HOUR button and then MIN button as setting week,until the correct time is displayed.When setting,the buttons WEEK,HOUR or MIN can be held down for rapid forward counting.

2.Release both buttons.The week and time will be set.

3.To reset completing settings,repeat previous steps.

CYCLE TIME FUNCTION

1.Press both buttons TIMER and CLEAR and release,the timer will entre into cycle function and LCD displays “cycle”,“on”.ON setting can be make now.

2.Press HOUR and MIN to adjust the time as your expected,the appliance will keep on and turn OFF after the time.And then press the button TIMER to complete ON setting.LCD displays “OFF”.Now OFF setting is beginning.

3.Press HOUR and MIN to adjust the time as previous steps,and the appliance will turn ON and keep off after the time.Until LCD displays “on”.

4.The timer will ON and OFF in turn by your setting.

COUNTDOWN FUNCTION

1.Press both buttons CLOCK and MODE to enter into the countdown function.The LCD displays “countdown”,“start”,”00:00”.

2.Press HOUR and MIN to set the time as your expected.

3.Press the button CLOCK to start countdown.The appliance will stop working after the time your setting.

4.Press the button CLOCK again to stop.

WEEK PROGRAMS SETTING

1.The timer has a total of 20 ON/OFF programs a day,18 combinations of day or blocks of days are available for this Timer as follows:

Mo

Tu

We

Th

Fr

Sa

Su

Mo,Tu,We,Th,Fr,Sa,Su

Mo,Tu,We,Th,Fr

Sa,Su

Mo,Tu,We,Th,Fr,Sa

Mo,We,Fr

Tu,Th,Sa

Mo,Tu,We

Th,Fr,Sa

Mo,We,Fr,Su

Tu,We,Th

We,Th,Fr

1.Press the TIMER button and release,The first ON setting can be made now.

2.Press WEEK button to choose one combination in 18.Then press the HOUR and MIN button to adjust the correct time.

3.Press TIMER button again to finish ON setting and enter into the first OFF setting.By repeating 2 to make the first OFF setting.

4.Press the TIMER button again to finish the first OFF and enter into second ON setting.Repeat 2 and 3 program remaning settings.

5.After completing settings,press the CLEAR button and hold for 5 seconds,it will save your program and be locked.Then press the CLOCK button and the TIMER is ready to operate.

EXAMPLE:TIMER ON at 16:20 and TIMER OFF at 20:15 everyday

a.Press TIMER and LCD displays “1”, “on”

b.Press WEEK until LCD displays “MO,TU,WE,TH,FR,SA,SU”

c.Press HOUR until LCD displays 4:00PM or 16:00.

d.Press MIN till LCD displays 4:20PM or 16:15

e.Press TIMER again and LCD displays “1”, “off”

f.Repeat the above c and d steps to make LCD displays 8:15PM or 20:15

g.Press the button “CLEAR” and hold 5 seconds to lock the program,the timer will work as your setting from now on.

TIP:When verifying your programs ensure that the settings do not overlap,especially when using the block option.

RANDOM FUNCTION

1.Press both buttons WEEK and HOUR,the LCD will display RANDOM.

2.When this function is ON,the setting will executed with a random advance of 0-32 minutes.

3.Press both buttons WEEK and HOUR to cancel this function.

SUMMERTIME FUNCTION

1.Press both buttons HOUR and MIN,the LCD displays “summer”

2.The clock will set back one hour.

3.Press the two buttons again to revert to wintertime.

12/24 HOUR MODE

Press CLOCK and TIMER simultaneously to turn between 12 and 24 hour mode.

SPECIFICATIONS

Voltage 220-240V AC 50Hz

Max Load 16A,3600W

Min Setting Time 1 Minute

Operating temperature -10 to +40℃

Accuracy +/-1 minutes per month

Battery backup NI-MH(Li) 3.6V>2000hours

產品推薦
“丹麥電子式定時器插座 可編程定時插座 丹麥排插 顯示屏定時開關”信息由發布人自行提供,其真實性、合法性由發布人負責。交易匯款需謹慎,請注意調查核實。
主站蜘蛛池模板: 绥滨县| 仙游县| 方山县| 横峰县| 衡南县| 北川| 通州区| 东至县| 海宁市| 博白县| 察哈| 全州县| 南昌县| 阿图什市| 方正县| 新疆| 宜宾市| 兴化市| 九龙县| 越西县| 大安市| 应城市| 隆回县| 永新县| 益阳市| 招远市| 宜春市| 论坛| 梓潼县| 永修县| 长岭县| 中宁县| 衡阳县| 涿州市| 泗洪县| 新兴县| 宁乡县| 大渡口区| 永吉县| 抚顺县| 柳河县|