產品分類 更多>>
類型
單片機
品牌
Microchip/微芯
型號
PIC18F66J65
封裝
QFP
批號
2012
芯片解密
PIC18F66J65芯片解密 PIC18F66J65芯片復制
程序解密
PIC18F66J65程序解密 PIC18F66J65程序復制
單片機解密
PIC18F66J65單片機解密 PIC18F66J65單片機復制
PIC18F66J65解密 PIC18F66J65芯片解密 PIC18F66J65單片機解密
電子元器件 集成電路開發與設計
、快速、準確 不成功不收費的解密
Selectable System Clock derived from Single
25 MHz External Source:
- 2.778 to 41.667 MHz
? Internal 31 kHz Oscillator
? Secondary Oscillator using Timer1 @ 32 kHz
? Fail-Safe Clock Monitor:
- Allows for safe shutdown if oscillator stops
? Two-Speed Oscillator Start-up
External Memory Bus
(100-pin devices only):
? Address Capability of up to 2 Mbytes
? 8-Bit or 16-Bit Interface
? 12-Bit, 16-Bit and 20-Bit Addressing modes
Peripheral Highlights:
? High-Current Sink/Source: 25 mA/25 mA on PORTB
and PORTC
? Five Timer modules (Timer0 to Timer4)
? Four External Interrupt pins
? Two Capture/Compare/PWM (CCP) modules
? Three Enhanced Capture/Compare/PWM (ECCP)
modules:
- One, two or four PWM outputs
- Selectable polarity
- Programmable dead time
- Auto-shutdown and auto-restart
? Up to Two Master Synchronous Serial Port (MSSP)
modules supporting SPI (all 4 modes) and I2C?
Master and Slave modes
? Up to Two Enhanced USART modules:
- Supports RS-485, RS-232 and LIN/J2602
- Auto-wake-up on Start bit
- Auto-Baud Detect (ABD)
? 10-Bit, Up to 16-Channel Analog-to-Digital Converter
module (A/D):
- Auto-acquisition capability
- Conversion available during Sleep
? Dual Analog Comparators with Input Multiplexing
? Parallel Slave Port (PSP) module
(100-pin devices only)
Special Microcontroller Features:
? 5.5V Tolerant Inputs (digital-only pins)
? Low-Power, High-Speed CMOS Flash Technology:
- Self-reprogrammable under software control
? C compiler Optimized Architecture for Reentrant Code
? Power Management Features:
- Run: CPU on, peripherals on
- Idle: CPU off, peripherals on
- Sleep: CPU off, peripherals off
? Priority Levels for Interrupts
? 8 x 8 Single-Cycle Hardware Multiplier
? Extended Watchdog Timer (WDT):
- Programmable period from 4 ms to 134s
? Single-Supply 3.3V In-Circuit Serial Programming?
(ICSP?) via Two Pins
? In-Circuit Debug (ICD) with 3 Breakpoints via
Two Pins
? Operating Voltage Range of 2.35V to 3.6V (3.1V to
3.6V using Ethernet module)
? On-Chip 2.5V Regulator
