技術參數 管道連接：多種連接方式供選擇 通徑:4.0mm,5.0mm,6.0mm 流量：0.34-11.5l/min, 0.22-7.75l/min,1.46-16.2l/min 　　 等多種范圍供選擇（隨型號和通徑而不同） 壓力：20℃時5.5Bar 溫度范圍：-10℃-65℃， 測量精度：小于2%，重復測量：＜+/-0.25% 驅動電壓：4.5-24VDC,10-16VDC(帶泡沫傳感器) 適用流體： 水，酒精飲料，非酒精飲料，啤酒，紅酒，化學物質。 Material: Housing: PBT 35%GF (Arnite) Bearing pin: Inox 1.4305 (18/8) Nozzel: Ø 1.0, 1.2, 2.0, 2.5mm PPS 40%GF (Ryton) Nozzel: Ø 5.6mm like housing O-ring: MVQ (Silikon) Turbine: PVDF Magnets: Keramik Sr Fe O (in contact with the medium) Screw: PT-screws (Phillips cross recessed) Technical data: Flow rate: 0.027 - 8.30 l/min depending on the nozzle diameter Measuring accuracy: +/- 2.0% Repetition: <+/- 0.25% Temperature range: -10°C to +65°C 14°F to 149°F Pressure range: 20 bar at 20°C 290 psi /68°F Mounting position: Horizontal* Nozzle size:Ø 1.0, 1.2, 2.0, 2.5, 5.6mm Electrical connection ratings: Power supply: +3.8 to +24 VDC Consumption: <8 mA Signal connection: Open collector NPN Signal voltage: 0 VDC GND (saturation <0.7 V) Signal load: max. 20 mA Leakage current: max. 10 μA Connections: 3-pin AMP 2.8 x 0.8 m Signal: Square-wave output Duty Cycle: ~50% 廣州迪川儀表科技有限公司 TEL：020-85628522 FAX:020-85628533 http://gzdckj168.cn.alibaba.com http://www.gz-dichuan.com 地址：廣州市天河區棠德南路117號