KV-168B/B-0 氣動彈力布定型機 KV-168B/B-0 Elastic Fabric Cup Molding Machine 用途： 適用于各種彈力布料的定型。 特點： 1.該機型可靈活變換使用功能，一機多用，適合壓棉壓布，綜合提升設備資源的有效利用。 2.突破傳統的機型設計，健康、衛生。（選裝） 3.夾布裝置平穩，避免打皺，適合各種彈力布料的成型。 4.具有自動調節適應能力，紅外線探燈定位，控制布料成型深淺度。（選裝） 5.左右獨立恒溫控制以及上下模臺雙向驅動原理，有效利用整機空間，克服發熱不均勻，耗電等缺陷。 技術參數： 1.電源/功率：220V/3.4KW 2.電熱片規格：Φ12×220mm×500W-220V 3.模臺尺寸：335mm ×220mm 4.機臺尺寸：800mm×670mm×2000mm 5.壓框尺寸：450mm×300mm 6.適用物料：文胸、服裝等面料的熱壓定型 7.適用模具：文胸棉模或定布模具，子彈頭模具 8.重量：250KG Function: It is suitable for the molding of the different elastic fabric. Features: 1. The machine is flexible to change the functions and used in many ways. It is suitable for compressing the foam and the cloth, which comprehensively promote the effectiveness the utilization of the machine. 2. Breaking through the traditional design, it adopts the four guide poles'positioning system, transparent shield and automatic smoke-pumping system. Healthy, environmental and sanitary.(selection) 3. The cloth clapping device is steady, which can avoid wrinkling and is suitable for all kinds of the elastic fabric. 4. It has automatic adjusting and adapting function, infrared searching lights to location. 5. Left and right thermostat and upper-and-lower moulds bi-directional driver, which can make good use of the whole space, overcoming the faults such as unevenly heating and electricity- waste. Technical parameter: 1. Power supply/Power: 220V/4KW 2. Specification of the heating pipe: Φ12×220mm×500W-220V 3. Dimension of the electrothermal pipe: 335mm ×220mm 4. Dimension of the machine: 800mm×670mm×2000mm 5. Dimension of the press frame: 450mm×300mm 6. Applicable materials: the heat-press molding of the bras and other garments 7. Applicable moulds: moulds for foam bras and fixing cloth and the bullet head moulds 8. Weight: 250KG