The proportional pressure relief valve, size 02, is a directly operated valve in a differential cone construction. It allows pressures to be set proportionally to the solenoid current. 該比例溢流閥，大小02，是在一個差分錐構造一個直接操作的閥。它允許壓力成比例設置為線圈電流。 The valve opens as soon as the pressure applied to port P reaches the current setpoint value (solenoid current) thus allowing the medium to flow to port T. If the pressure drops again, the valve closes with low hysteresis. To achieve an optimal resolution, there are numerous setpoint pressure areas available. Thanks to the stepped bore M16 x 1.5 thread and a solenoid edge length of 25 mm, the EEPDBDS 02 has a very compact construction. It has a fast, accurate and low-vibration response and is relatively insensitive to oil contamination. All function-relevant parts are hardened and honed. 閥門一旦壓力施加到端口打開P到達的當前設定值（線圈電流），從而允許介質流向口T如果壓力再次下降時，該閥具有低的滯后閉合。為了達到的分辨率，有很多可用的設定點壓力區。多虧了階梯孔M16×1.5螺紋和25mm的螺線管邊緣長度，EEPDBDS02具有非常緊湊的結構。它具有快速，準確，低振動響應和相對不敏感，油污染。所有的功能相關的部件都淬火和磨練。 Features: ? Proportional pressure relief valve in a differential cone construction ? Pressure range up to 315 bar ? Screw-in cartridge for stepped bore T-8A ? Compact construction (solenoid edge length: 25 mm) ? Low vibrations ? Low leakage ? Maintenance-free 比例溢流閥在差分錐建設 壓力范圍高達315巴 螺紋插裝的階梯孔的T-8A 結構緊湊（電磁邊長：25毫米） 低振動 低漏 免維護 Technical specifications Direct operated, solenoid actuated Max operating pressure 315 bar Max flow rate 2 l/min Connection stepped bore T-8A 技術規格 直動式，電磁驅動 較大工作壓力 315巴 較大流量 2升/分鐘 連接 階梯孔的T-8A