ORDER NO. A B C a d Gross Weight Meas.CFT CODE NO. Inquriy VA-4 102 36 103 325 243 (C) 20 0.5 1002-030 Inquriy VA-5 131 36 110 357 278 (C) 30 0.9 1002-031 Inquriy VA-6 152 46 142 418 328 (C) 42 1.5 1002-032 Inquriy VA-8 200 62 197 548 416 (W) 80 2.7 1002-033 Inquriy VD675 152 38 190 552 381 (C) 43 1.5 1002-034 Inquriy VA-8L 203 60 266 596 330 (W) 80 2.7 1002-035 Inquriy VERTEX angle fixed milling vise VA-4,5,6,8 臺灣鷹牌角固式虎鉗 FEATURESAngle lock & rotate milling vise T 1. Use highest quality ductile Iron 80000 PSI for minimum bending. 2. The enclosed lead screw and sliding surface are harden and ground. 3. Highest clamping power. It’s very accurate and durable. 4. This Vise is so designed that the horizontal force generated by tightening the handle pushes the semi-sphere within the movable jaw and thus thrusts the movable jaw downward. Therefore, the workplace does not move up, even if it is held at the top of the jaw plates. 5. Four setting positions of the jaw plates are available, widening the jaw plates opening. 6. The new VD675,VA-8Lhave two major improvements: a wide opening jaw and a new stationary jaw that features an intergral key,larger fasteners which reduce deflection by 50%